Resilient Channel Review Guide :Should i Use Resilient Channel For wall or Ceiling?

In soundproofing, the very most common approach to block transmission of noise is through the decoupling, where the primary focus is to trap or change the medium of transmission of noise and the very best effective solution to achieve that is using a resilient channel.

During soundproofing, we work on almost every factor to block the noise coming from another side of the room or area by using different soundproofing materials but we miss to focus on the impact noise.

Which usually comes from the ceiling, floor or wall and it is not easy to reduce without implementing proper soundproofing approach.

Probably you have read our detail guide on how to soundproof wall using the resilient channel, in that we learned how using the resilient channel you can set another layer of drywall on top of existing wall and can trap the noise.

Hence in this guide, we will go through various factors such as what is a resilient channel, how to use a resilient channel, how to install resilient channel, how resilient channel can help you to install drywall, resilient channel vs hat channel vs resilient isolation clip.Best Resilient Channel (Review)

This detailed guide has the answer to all your queries which will be ended by the recommendation of a few best resilient channel which you can buy for soundproof ceiling, wall or floor.

What is a Resilient Channel?

Resilient channel is a thin metallic strip with a pre-drilled hole on it which is easy to screw against existing wall or stud or any hard surface. It is also known as RC or Z channel.

If you are planning to install any additional layer on top of the existing wall the best solution is to use the resilient channel. It separates the existing wall with any additional layer installation, so in between this it can create a decoupling zone where the noise or soundwaves can be trapped easily.

You can get an easy idea of what is a resilient channel from the explanatory video.

Resilient channel is of different types, where few of them are single-leg however others are two-leg. Here legs mean the width and number of holes available to drill against the wall.

Few channels are having only a single series of holes however in other is having two parallel series of holes which fix best against the wall and stable enough as compared to the single-leg channel.

While considering the size of the channel then ideally it will be in between 1/2″ in-depth and 8 feet long and you can go with higher than this based on your required uses.

Now you may be thinking of how effective is a resilient channel and why you should use it, so let focus on the same to get you more idea.

How Effective is a Resilient Channel should I use it?

While soundproofing of any house or room and planning to implement various techniques then the very big area which you concerned enough is how to soundproof a wall or door or ceiling and in all cases, the best-suggested solution is covering the existing setup with an additional layer but why?

If you have gone through our previous lesson where we discussed the different principles of soundproofing such as

SoundProofing  – It is the key techniques where our primary focus is to block the sound and stop it from further transmission.

Sound Absorbing– Sound Absorbing primary focus is to absorb the soundwaves and improve sound quality.

Sound Dampening – While working on dampening then our primary focus is to minimize the vibrations and reduce the resonance.

Decoupling– Probably this is the major area where our focus is to change the medium for sound transmission, so it gets slow down and dissipate energy and reduce the further vibration or transmission of the sound waves.

Out of the four principles the resilient channel helps to achieve decoupling which reduces the airborne noise coming from the other side of the wall or ceiling, in addition, if you have heard the concept of room inside a room that is also possible by the use of the resilient channel, Let me explain how it works?

Let say you are struggling with the noise coming from the neighbor due to poor quality of the wall then the best solution to block the noise is to set another layer on top of the existing wall. Wich can be done by simply screwing the drywall layer directly onto the existing wall but it is not recommended.

Drywall fix with Stud using resilient channel

As if there is any vibration on the other side of the wall your existing drywall will also start vibrating and no sense to have such setup but resilient channel help to separate out both walls from each other.

In the detailed guide of noise, we learned how noise transmits from one place to another and in summary, I must say it travels faster in solid as compared to air or vacuum, so why not create a barrier of the environment by setting up a resilient channel.

First screwed resilient channel on top of existing wall and now on top of resilient, screw the drywall and in such a way you can create great isolation for the noise by setting decoupling zone.

Now when noise coming from the other side of the solid wall pass through the air or vacuum then it slows down and dissipates energy and later then pass through the drywall. Just for the recommended suggestion, on your top layer of drywall, you can use mass loaded vinyl (MLV) which block the noise on drywall itself.

You have heard about Sound transmission class (STC) or Impact insulation class(IIC). Both of this rating explains the ability of any material to block the sound transmission or impact noise, hence resilient channel helps to improve the STC score or IIC of your existing wall or ceiling.

Now you got an idea of how effective is a resilient channel and why you should use it in soundproofing, let me get you a few more ideas on how resilient channel is different than hat channel and sound isolation clip.

Resilient Channel vs Hat Channel vs Sound Isolation Clip

Resilient channel is no doubt an effective solution to reduce the noise but it is not the only a solution to create decoupling there are various others and in this list, the two well known are resilient Hat channel and sound isolation clip.

Till this point, we learned that a resilient channel is directly screwed against the wall and on top of that you can set the drywall or any additional isolation layer like plasterboard, etc. But the use of Hat channel has additional advantages.

Hat channel is used with sound isolation clip were on the existing wall first the isolation clip will be added and the hat channel is clamp inside the isolation clip and then you can set your additional layer like drywall or plasterboard.

Here the advantage is, this time noise has to go through the additional layer of sound isolation clip then Hat channel and then the final top layer which increasing the decoupling zone and this is simple to understand the larger the decoupling zone more energy dissipation.

But even using resilient channels and setting up green glue in between the layer of walls can also dissipate most of the noise or energy and can achieve the same level of noise reduction so it is all up to you which approach you to want to opt for.

Well, till this point I consider that you are confident about what is a resilient channel, how effective it is and why you should use it. So let me get your best resilient channel and hat channel which are effective enough for your noise reduction objective.

Best Resilient Channel and Hat Channel and Sound insolation clip

I believe you are sure now which one you want to purchase but here is some pre guide to assure you that whatever you are purchasing is an exact match with what basic resilient channels need.

Here are a few points you should always check:

  • Length: Ideally resilient channels are of 8 feet long.
  • Gauge – Ideally every resilient channel is made of 20-25 gauge steel metal.
  • Depth – It is key point which decides what airgap it will create so ideally it should be in the range of 1/2″.
  • Density – It will decide the hardness of the channel so try to get one which is denser so it can easily be screwed with the wall.
  • Price – The price matters for the quality, the more you spend the more quality you will get.

The depth of the resilient channel is half as compared to Hat channel due to the extra layer of sound isolation clip but the results are quite similar. So let discuss the best resilient channel.

Best Resilient Channel

Let first discuss the best available resilient channels which fulfill our need and as we learned earlier, it does not need sound isolation clip so will just go through the best which people are buying and experiencing with a positive review.

Auralex RC-8 Resilient Channel

It is a one-leg resilient channel manufactured by a well known acoustic manufacturing company called Auralex Acoustic where it meets your all best requirement.

It is made with same reason to hang the drywall instead of attaching them directly to the wall where this best resilient channel is 8 feet long 25 gauge ideal channel which strongly creates isolation for sound transmission from the wall. 

Here are listed features of the RC-8 channel.Resilient Channel for soundproofing

  • Length: 8 Feet
  • Gauge: 25
  • Material: Steel
  • Air Pocket: 1/2″

This resilient channel is ideal for your need where it is long and dense enough to fix against the wall creating the required air gap for ideal decoupling zone.

This product is ideally used in your bedroom, office, private space for wall or ceiling soundproofing.

Buy Now on Amazon

The box you purchase will have a total number of 24 pieces where each piece will be an 8-foot long resilient channel. Here they offer two sets of product one are RC-8 and other is RC-1, so I recommend to have RC-8 as it is wider and dense enough to work and install perfectly.

RC-8 should be installed horizontally at bottom or top of the wall for correct installation and they are claiming that around 2 layers of drywall with each 5/8″ with an additional layer of sheet block can be hung on the RC -8 resilient channel.

I believe in Amazon sellers and that is why I checked the customer review of Auralex RC-8 Channel and then I suggested here but I advise to search more in case you are looking something different.

Trademark RC-1 Resilient channel

Well, the previous choice was in case you are looking for RC-8 Resilient channel however in same list resilient channel manufactured by Trademark soundproofing is very famous which is one leg RC-1.

It will be your low-cost efficient solution in reducing sound transmission in both steel or wooden partition. This resilient channel will be having a pack of 32 pieces with a length of 8′ each.

While checking the features here we have the highlights:RC-1 Resilient Channel

  • Dimension: 2.0″ W x .5″ D x 96” L
  • Gauge: 25
  • Material: Steel
  • Air Pocket: 1/2″

Like another channel it does not require sound isolation clip can directly drill against the wall. It can hold two layers of drywall with each weight of approx 1.6lb.

Buy Now On Amazon

As I suggested, if you are looking for a cost-effective solution then only you should choose RC-1 instead of RC-8. This is mainly designed for the wall and will do its job of blocking the noise.

Best Hat Channel and Sound Isolation Clip

Probably there are very limited choices to found out the best but I have gone through few to get best out of them and here we have our best findings.

Hat Channel by Trademark Soundproofing

They provide a 2 leg Resilient hat metal channel with 25 Guage metal quality which works with all standard sound isolation clip.

This channel is designed to easily hold two-layer of drywall with 5/8″ size of each. This is available in a bundle of 20 pieces with length 8.6′ each which is good enough for ceiling soundproofing.

Here are feature listed for the Hat Channel.Resilient Hat Channel

  • Length:8.6′
  • Gauge: 25
  • Material: Steel
  • Air Pocket: 7/8″

Remember the Hat channel snaps into the clips so always recommend to have set of clips and it is never recommended to drill through the Hat channel, which indirectly reduces its isolation property.

Buy Now On Amazon

Well, it up to you which one you want to implement resilient or Hat channel but Trademark manufactured resilient Hat channel I found the best among all the Amazon available products.

Best Resilient Sound Isolation Clip by Trademark

Resilient sound insulation clip is also known as RSIC where it helps to improve the STC score of the partition. Here the best one is manufactured by the Trademark Soundproofing where you will get set of 10 RSIC-1 clips plus 10 screws and installation guide in affordable price. 

It is far better to use against Wood, steel, concrete wall or ceiling or floor purpose.Where it claimed to gain an additional 15 STC as compared to just use of the resilient channel.

Here are the highlights.Resilient Sound Insulation clip

  • Pieces: 10
  • STC Improve: 15
  • Ideal fit size of the Hat channel: 7/8″ depth and 2.5″ wide

Well, as to use resilient Hat channel, it is primary need to have Sound clips and an approx if you want to cover 250 sq foot area with 10″ wall then probably you will need around 150 clips for your 4 walls which around  65*10 feet in dimension, so better to check their specification guide.

Buy Now on Amazon

Where few people also suggested to use it with MLV to the stud and then on top of that you can set to this RSIC.The most product recommended by users is from the Amazon only so better to check from your side for your required specification.

Well, I imagine till this point you have learned a lot about Resilient channel, Hat resilient Channel and sound isolation clip and their best available.

So let before closing this detailed guide, I will brief you on how to install resilient channel as we are more focused on Resilient channels instead of Hat Channel.

How Do You Install a Resilient Channel on a Ceiling or Wall

Well buying the right product is primary part but how much it effective in sound isolation or noise reduction will totally depend on how accurately you install a Resilient channel.

For your quick Recap on Installation of the channel on the ceiling, you can also take help from below video.

So let discuss the key factors you should aware of otherwise your whole setup will be worthless and you won’t get that much advantage of your investment.

Identify the Best place of the Stud

Probably if you can view the stud or joist then you can directly drill the Resilient channels against it by using screw but what if you can not view this then the very first thing is to remove your existing drywall to get up to stud.

Once you are close to stud then examine the best possible outlet of noise and plan your electric boxes and wire cables accordingly. 

Well after removing drywall, you will have spaces in between the studs or joist, so for proper isolation of sound, I advise filling this with soundproof insulation materials.

Drill your channel against the wall or ceiling

  • The resilient channel will be mounted at the right angle to the stud while fixing against wall or ceiling. Well in case of the wall make sure all the narrow flanges should be at the bottom and larger will be at the top.
  • Find out the center spot of the stud to drill accurately to the resilient channel.
  • While installing resilient channel, make sure it has an intersecting surface of around 1/4″ on the side edges and 4-6″ from top and bottom of the wall. 
  • Take help from a person while drilling a resilient channel against the stud otherwise, you may lose the linear fixing and maybe unnecessary holes on the walls.
  • If working on the wall then Stud will be verticle so position the resilient channel horizontally however on the ceiling it will be vertically so better to use a ladder for hassle-free installation.

Set Layer of Drywall on Resilient Channel

  • Essentially, you have already decided you want to fix the thick soundproof drywall to the resilient or want to have sandwich drywall with green glue.
  •  Soundproof drywall has an STC score of more than 50, so you won’t need green glue for the same however you can create a sandwich of drywall using green glue.
  • This time is to hang drywall near resilient channel and mark points on the drywall sheet which ensures you are making holes at the right place,
  • Now simply drill the screw through drywall and then resilient channel and make sure it won’t cross the stud else will create a direct connection with primary wall and it will be less effective.
  • Well, if you have done this installation that means this time is to cover your wall with additional blocker which is optional.

Additional Tips

  • If you are expecting more improvement in sound insulation then it is advisable to use Mass loaded vinyl on the stud prior to drilling the Resilient channel and on top of the Drywall which ensures the additional density or mass of the wall and blocks the noise coming from the other side.
  • Use Green glue in between the primary and secondary wall due to its viscous nature it dissipates all sound energy into heat and causes less transmission of the noise.

Here is end on Resilient channels and their best available products in the market, how effective it is and why you should use it and at the end, we also learned how to install sound insulation clip, resilient channel and drywall perfectly.

My View on Should I use Resilient Channel?

Well, there is nothing to say about the resilient channel as we have already gone through a lot but in summary, I must say if you are struggling with impact noise from the ceiling or airborne noise from another side of the wall then better to install resilient channels.

If you are able to create decouple zone using resilient channels then definitely you are reducing the noise quality and almost every person use it especially to soundproof a wall or ceiling.

I advise using soundproof drywall which will be thicker as compare to normal drywall and if you do not have any then better to create a sandwich of the thin layer drywall for effection isolation.

If you have used any of the above one, then share your experience with our reader so they can plan their future buy accordingly.