5 Expert Tips To Change Kitchen Sink Drain & Save Money

5 Expert Tips To Change Kitchen Sink Drain & Save Money

A Kitchen sink drain is the part of the kitchen sink that allows the water to flow out by passing through the waste pipe. According to reports of verifiedmarketreports.com, The Sink Drain Market is projected to grow significantly from 2023 to 2030. 

This growth is driven by increased demand in both residential and commercial applications worldwide. Therefore, the information on how to change the kitchen sink drain is provided below for you in this article. 

Guide Before Changing Kitchen Sink Drain  

The kitchen sink drain is necessary to install. Some important things should be kept to do if you want to do this work by yourself. Here, you will find the guide Before changing the Kitchen Sink drain.  

  • Right Size: The right size will perfectly help to replace the kitchen sink drain. So, you must buy the correct kitchen sink drain to fit in the kitchen sink. 
  • Proper Tools: You will be required to use the tools to do the work. Check if you have or not. Also, you must have the tools in good condition to ensure smooth work. 
  • Care Fullness: You should not do the work in a hurry. It’s important to take your time to ensure each step is completed correctly to avoid issues later. 
  • Not Compatible: If you are a person who can’t do there is not much compatible to do. Then, it’s better that you seek a professional to do the work without any problem. 

Tools And Supplies Needed To Change Kitchen Sink Drain? 

For a successful repair, you should have a proper collection of tools and supplies. Therefore, these tools will be useful and helpful for you to do the work more easily. 

Old Plumbers PuttyPutty is important for sealing the drain flange to the sink. A stain-free putty is suitable for different sink materials to prevent stains.
BucketYou may need a bucket for storing the water which can fall out from the pipe. It will collect the water if any leakage occurs. So, place the bucket below to keep some water that falls out.
Old Towels or Shop TowelsThe old towel can be used for cleaning purpose. These are just rags or old towels that help to clean up any mess and to catch drips. 
New Kitchen Sink DrainA Kitchen sink Drain will be required for replacement. But, make sure that it fits correctly with your pipe. 
Pipe WrenchA pipe wrench is a tool which is used to grip and turn pipes. It has adjustable jaws with teeth that bite into the metal for a strong grip. Plumbers use it to tighten or loosen pipes and fittings.

5 Simple Ways To Change Kitchen Sink Drain: You Can Do It! 

There are many varied processes followed for changing kitchen Sink Drain. But, you don’t have to search for them all online. Therefore, we have provided below on how to change the kitchen sink drain for you all. 

1. Ready With All Things 

To change your kitchen sink drain, you need to start by gathering all the necessary tools. You will require some tools as having them ready will make the job easier. Therefore, Make sure to have the tools before proceeding to start the work. 

Next, ensure that you have a new strainer that fits the standard size of your drain opening. Remove any old plumber’s putty from the sink using your finger and a wet paper towel.

Before you start, you need to turn off the water supply to your sink. Also, you can place a bucket under the sink to catch any remaining water. This will help keep your workspace dry and prevent spills.

Finally, make sure the sink surface is clean. A clean surface will make it easier to install the new strainer and ensure a good space to work.

2. Need To Remove Old Drain 

Being ready with all things, you can proceed to change the Kitchen sink drain. The trap may also differ for your old drain, which you should know. Therefore, some might have simply a long tailpiece pipe instead of a trap. 

Attach the tailpiece to the new drain, slide the slip nut up onto the drain, and tighten it. Place the hi-hat gasket on the tailpipe. Attach the tailpipe to the drain and secure it with the nut. Hand-tighten and then give it an additional quarter turn with a wrench. 

Use the pipe wrench to turn the strainer nut counterclockwise and remove the tailpiece until it is loose from the old strainer. Insert needle-nose pliers into the sink strainer to keep it from turning. 

Loosen and remove the locking nut and washer from underneath the sink. Remove the rubber gasket from under the drain and lift the drain out from above. You have to Push the old strainer up to remove it out of the drain hole. You need to follow the process of Remove the old drain by detaching it from the sink.

3. Install The New Drain

This way we need to install a new drain which will replace the old drain. Begin by taking a small amount of Rolling Plumber’s putty into a snake-like shape. Therefore, this will ensure that it’s well-seated. 

You need to place it around the underside of the drain hole in the sink. This step is important for preventing leaks and ensuring a secure fit. After that, the putty should be inserted into the lip of the new drain into the hole from above. 

Make sure to press it firmly so that the putty spreads out and creates a good seal. Finally, ensure the new drain is seated properly and securely in the sinkhole. This will help prevent any future leaks and keep the drain in place.

4. Properly Connect The Drain 

To properly connect the drain and prevent leaks, ensure all drain parts are correctly attached. Different sinks have various parts that need to be connected. Therefore, the parts to attach also differ which leads the installation process to vary. 

It’s crucial that you properly attach all the parts that come with your sink. The missing of any part can lead to leaks causing water flow issues. From underneath the sink, install the rubber gasket, washer, and locking nut onto the tailpiece.

You have to hand-tighten the locking nut onto the drain threads first, and then use a wrench for a snug fit. Be careful not to overtighten, as this can damage the parts.

Finally, remove any excess putty that squeezes out around the drain. This will ensure a clean, leak-free installation.

5. Check The Installation 

Lastly, you need to check the installation to ensure that all the things are completely fixed. Ensure everything is tight but avoid over-tightening to prevent deformation of a material. Therefore, you must ensure that the strainer is centered in the drain hole. 

Run water to check for any leaks. Tighten the connections further if necessary to stop leaks. Turn on the water supply and check for any area around the new drain and connections. If you notice any leaks, tighten the connections as needed.

You need to test the sink by running water through it to ensure proper drainage. This step confirms that everything is working correctly. By following these steps, you can successfully install a kitchen sink drain and upgrade to improve the functionality of your sink.

How Can You Clean Your Kitchen Sink Drain?

To clean your kitchen sink drain, start by gathering white vinegar, baking soda, hot water, a brush or scouring pad, and possibly a plunger. If the sink is clogged, use the plunger first to clear it. 

Next, pour half a cup of baking soda into the drain followed by a cup of white vinegar. Let this mixture sit for at least two hours, or overnight for best results. Afterward, boil some water and pour it down the drain to flush out any loosened debris. 

Use a brush or scouring pad with baking soda or toothpaste to scrub the sink and drain area, then rinse thoroughly with water. For regular maintenance, periodically pour hot water mixed with vinegar down the drain to keep it clear and prevent clogs. 

Wrap Up On How To Change Kitchen Sink Drain   

The steps told to change the kitchen sink drain in this article can help you to easily replace it without any problem. Therefore, you must go through each of the sections carefully and understand the steps to do it. 

A kitchen sink drain is the part that lets water flow out of the sink into the plumbing system. It includes components like a nut, gasket, washer, etc which help seal the drain securely to prevent leaks. 

Installing or replacing a kitchen sink drain involves understanding these parts and how they fit together, as well as using tools like a wrench to tighten everything properly. Lastly, you can consult a professional if you encounter any difficulties during the installation process.

Also, we hope this article helped for find how to change the kitchen sink drain. So, you must visit our website for more such updates. You can comment below on this article in the comments section for any doubts related to the topic. 

FAQ: How To Change Kitchen Sink Drain 

Most people while looking through the Kitchen Sink Drain also have some questions related to it. This is the reason we have provided some important questions along with their answers related to the topic in this section.

Q1. Do kitchen sink drains are the same size?

Ans: No, kitchen sink drains are not of the same size. The size can vary based on factors like the type of sink and plumbing setup. Therefore, It’s important to check the drain size before installing or replacing any parts to ensure they fit together correctly.

Q2. How can you know what sink drain you need to buy?

Ans: Sink Drain can be easily known. You can know by measuring diameter, type, installation, compatibility, and many more, etc. Therefore, you can seek a local plumber for the work for quick replacement of kitchen sink drain.

Q3. Can anyone able to change the drain on a kitchen sink?

Ans: Yes, anyone can change the drain of a kitchen sink only if you know basics of plumbing. It will only take some time to change the drain. Therefore, you must have the required tools to do the work.

Hey, I am Kirtish Vyas a YouTuber and believer in making life peaceful, a couple of years back I started soundproofing my house, bedroom, studio, and Car to reduce the unwanted noise, and the same experience I am sharing on SoundProofidea. Read More

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.