![10 Minutes Work To Clean Honeycomb Pads In Cooler [easy and simple work to do]](https://www.soundproofidea.com/wp-content/uploads/2024/07/Soundproof-Idea-15-compressed-1024x576.jpg)
Cleaning the honeycomb pads in your cooler is essential to maintain its performance and efficiency. According to reports of entrepreneurindia.co, The global market for air coolers with honeycomb cooling pads was worth USD 1.2 billion in 2018.
This is expected to grow by 10.8% each year from 2019 to 2025 which is making necessity for cooling in homes. Therefore, the information on how to clean honeycomb pads in cooler is provided below for you in this article.
Table of Contents
Guide Before Cleaning Honeycomb Pads In Cooler
Cleaning honeycomb pads in a cooler is necessarily essential for maintaining good airflow. Here, you will find a guide before cleaning the honeycomb pads in your cooler.
- Identify The Problem: It is important to determine why the honeycomb pads must be cleaned. Common issues include accumulated dirt, reduced airflow, and unpleasant odors. The problems can lead to issues that you need to fix.
- Wear Protective Gear: During the cleaning of the honeycomb pads of the cooler. You will be using an acid-based cleaner to be protective from dust. So, you need to wear gloves to avoid contact with the skin to prevent burns.
- Inspect for Cleanliness: The honeycomb pads should be carefully cleaned. So, you need to check the pads to ensure they are clean. If necessary, repeat the cleaning process to clean again the dust which is not washed during the first time.
- Don’t Panic: The cleaning agent will take some time to react with dust. This will remove all the dust when the reaction takes place. So, you just need to be patient to do the work.
Tools And Supplies Needed To Clean Honeycomb Pads In Cooler
Before you start, make sure you have all the tools that you’ll need for cleaning. The right tools and supplies will make the cleaning process smoother and prevent interruptions during the process.
| Item | Description |
| A pair of gloves | A pair of gloves helps you get protected when you use the toilet cleaner acid. So, you must wear gloves to prevent yourself from the incident from happening. |
| Safety glasses (optional but recommended) | This is optional as it can be used to protect your eyes to be protected. The drops of acid or dust may enter your eyes. |
| Toilet Cleaner Acid | This is a cleaning product made of acid which is used to remove dirt from the cooler’s honeycomb. It helps to restore the cooler’s performance by clearing blockages. |
| Needle | A needle is required to create a small hole in the cleaner lid for better application. It will help to flow the liquid fall in a particular direction towards the honeycomb pads. |
| A Soft-bristled brush | The brush will help in cleaning the honeycomb pads. It will help you to easily remove the dirt that may be left after the use of the toilet cleaner acid. |
| Soft cloth | When the honeycomb pads are washed with water. Then, you will need a soft cloth to easily dry it. |
10 Minutes Work To Clean Honeycomb Pads In Cooler: You Can Do It!
There are easy processes followed for cleaning honeycomb pads. But, you don’t have to look in searching for them all through the information available online. Therefore, we have provided below on how to clean honeycomb pads in the cooler for you all.
1. Turn Off The Cooler
The First thing you need to do is to be ready with all the tools you need to clean the honeycomb pads of your cooler. The process of cleaning these pads is a straightforward task that can be done fairly quickly. Therefore, you must follow the steps properly to ensure a thorough job.
Before you start the cleaning, you must make sure to turn off and unplug. This step is crucial for your safety because it eliminates the risk of getting an electric shock. So, you must always remember to turn off the cooler and unplug it to completely stop the electricity.
For your safety, it is always important that you turn off and unplug the electric appliances before starting any kind of work. This prevents any risk of getting an electric shock. So, this ensures that you can clean it safely and effectively without any electrical hazards.
2. Follow The Dessemble Process
Next, You need to remove the honeycomb pads from the cooler carefully. You may require a screwdriver to open the cooler. Therefore, Ensure you use a right size screwdriver that fits the screws to avoid stripping them.
It is good to Place the screws in a tray so you don’t lose them. Depending on your cooler model, you may need to press down on the pads and pull them out or lift them slightly before withdrawing them.
The dessembly process may differ for taking out as it varies honeycomb pads with different types of coolers. So, you must handle the pads carefully to avoid damaging them. This way we will be ready to apply the cleaning agent in the next step.
3. Apply The Cleaning Agent
Before, you should locate the outfall for your water tank as by twist to open and drain any remaining water. Therefore, this ensures that you won’t spill water while cleaning and makes it easier to handle the cooler.
To start cleaning, we will be requiring a cleaning agent as toilet cleaner acid. You need to make a small hole in the cleaner’s lid bottle using a needle. This will allow the liquid to fall precisely to flow towards the honeycomb pads.
So, you need to Pour a thin layer of the toilet cleaner over the honeycomb pads. Ensure the cleaner covers all dusty areas to react with the cleaning agent for clean up.
4. Clean Up The Honeycomb Pads
Let the cleaner sit on the pads for about at least 10 minutes or more. This waiting period allows the cleaner to loosen the dust and dirt trapped in the pads, making cleaning easier. Therefore, you should notice during this time that the cleaning agent starts to break down the grime.
The honeycomb pads are cleaned with the use of toilet cleaner acid as it is effective for this purpose. Also, you must avoid using harsh chemicals or rough brushes for cleaning as they can damage the pads.
By following these steps, you’ll ensure that your honeycomb pads are cleaned properly without causing any harm to them. But, there are more steps you need to follow to go with the process of cleaning.
5. Rinse The Water Properly
After the cleaner has worked on the pads, rinse them thoroughly with water. Use a bucket or hose to wash off all the cleaner and dirt. Therefore, you need to make sure to remove all the dirt and debris from the pads.
You should use a soft-bristled brush to gently scrub to remove the dust and debris. After cleaning, set the pads aside to dry completely. Wet pads can cause mold and mildew to grow. This can be harmful and can reduce the efficiency of your cooler.
While the pads are drying, take the time to clean the rest of the cooler, including the water tank and the fan. Use a soft cloth and if necessary you can use a small brush to reach corners and small parts for cleaning.
6. Follow The Reassemble Process
If the pads are still dirty, repeat the cleaning process with another bottle of cleaner. Let it sit again for some time and then rinse thoroughly. Therefore, this will clean the honeycomb pads of your cooler.
Once everything is clean and dry. This ensures the pads are clean and ready to use. Make sure all parts are securely in place to follow the easy Reassembly. Then you have to place them back by reassembling the parts of the cooler.
The screws need to be tightened properly which needs to be done with the screwdriver. This will make the cooler to work properly without any kind of unusual problem in the future.
7. Perform The Check Of The Cooler
Lastly, you need to check the performance of the cooler. Plug in the cooler and turn it on to ensure everything is working correctly. Therefore, the cooler will provide you with improved airflow along with good cooling if it is cleaned well.
Also, you need to check for any leaks or unusual noises that might indicate a problem. This way, you can ensure that your honeycomb pads and cooler are thoroughly cleaned and maintained. It helps to improve the efficiency and lifespan of your cooler.
Why Honeycomb Cooler Is Not Cooling
Honeycomb coolers might not cool well for a few reasons. First, they need good ventilation. If your house is on the ground floor and you can’t open windows or doors, the cooler can’t bring in fresh air, making it less effective.
Second, proper placement is important. The cooler should be near a window or an area where it can draw in outside air. If it’s too small or cheaply made, it won’t cool a large space well.
Lastly, maintenance matters. Honeycomb coolers need enough water to work properly. If you don’t add enough water or if the water isn’t cool, the cooler won’t work well. Using water from the fridge and adding ice can help improve its cooling.
How Can You Able To Maintain Cooling Pads
To keep honeycomb pads in your cooler working well. You need to clean them accordingly based on how much you use it. Therefore, the more you use the more you need to clean the cooling pads of the cooler.
Otherwise, the users are advised to clean at least after 2-3 weeks and take a cooler for less use. This stops salt and dirt from blocking the pads and keeps them effective. Replace the water in the cooler regularly.
Dirty or salty water can damage the pads. The freshwater helps them last longer. When you need new pads, choose ones that are not too hard or soft and can absorb water well. Good maintenance and quality pads keep your cooler running smoothly.
Wrap Up On How To Clean Honeycomb Pads In Cooler
The steps told to clean honeycomb pads in this article can help you to easily replace them without any problem. Therefore, you must go through each of the sections carefully and understand all the steps to do it.
Clean Honeycomb Pads play a great role in cooling room temperature. If the pads are not clean then the dirt prevents water from flowing properly through the pads, reducing their ability to stay wet and provide cooling.
Handle the cleaner with care to avoid any accidental contact with your skin or eyes. Always follow the safety instructions on the cleaner’s label. Lastly, you can consult a professional if you don’t have much time to do.
Also, we hope this article helped for find how to clean honeycomb pads. So, you must visit our website for more such updates. You can comment below on this article in the comments section for any doubts related to the topic.
FAQ: How To Clean Honeycomb Pads In Cooler
Most people while looking through honeycomb pads also have some questions related to it. This is the reason why we have provided some important questions with their answers related to the topic in this section.
Q1. What is mainly the life of honeycomb cooling pads?
Ans: The life of honeycomb cooling pads is typically around one to two years. After this period, they can get very dirty. Therefore, it may lead to blocked airflow which reduces much of the effectiveness of airflow.
Q2. What are honeycomb pads are really made of?
Ans: Most of the Honeycomb is commonly made from special paper or synthetic materials shaped which is shaped like a honeycomb. Therefore, this design helps water evaporate more efficiently for cooling the air better as it passes through the pad.
Q3. Why is your honeycomb pad is not getting wet?
Ans: The honeycomb pad is not getting wet because it is blocked with dirt. You must ensure all the other components of the cooler are working to allow the flow of water. Therefore, Regular cleaning is necessary to keep the pads clean and functioning well.
